Edge Clips Cable Clips for Edges   T50 Rose 4a

Edge Clips Cable Clips for Edges T50 Rose 4a

Securely fasten cables and pipes to edges – without drills or adhesives. EdgeClip cable clips for edges are tiny cable tie mounts. These special plastic components are held in place by built-in spring steel clamps. The EdgeClip is a cable-fastening solution that enables the flexible routing of wires, cable harnesses, conduits and pipes in a variety of industrial applications, including the automotive sector. Cable clips for edges allow you to securely fasten cables: without drilling without welding anchor bolts wherever it’s not possible to use adhesives These cable clips can easily be attached to the edge by hand. No additional tools are required for installation.
Select your options

Further information

Selecting the right EdgeClip depends on edge thickness and edge height

cable clips for edges, parallel to the direction of the edge

There is no such thing as a universal cable clip for edges, as the applications in different industries can vary wildly. There are considerable variations in the edge dimensions and the materials used to make the edges.

Cable ties for three edge thicknesses

0.5 mm to 2.5 mm

1.0 mm to 3.0 mm

3.0 mm to 6.0 mm

The most frequent enquiries relate to the fastening of cables on sheet metal edges of between 0.7 mm and 0.9 mm – for which our EdgeClip Mini is the first choice. cable clips for low and narrow edges Our EdgeClip Mini (EC0.5-2.5SP-SV) is also recommended for applications in which the edge measures just 6.0 mm in height.

The two-part EdgeClip EC5 cable tie is the best choice when it comes to fastening cables to edges with a minimum height of 9.0 mm.

Enquire about this item

Enquire via Email